T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
15- 18 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Travel brake system – 3100.2
Multiple disc brake, support arm
15.5.2 Dismantling
• Lift the brake out of the support arm wheel.
• Place the brake on a clean and dry work bench with the magnet
housing (6) facing upward.
NOTE!
Exercise care so that the components and cables are not damaged
during this and the following work.
• Loosen and remove the sex M6x40 socket head screws (12) and
their washers
• Remove the aluminium end plate (6).
NOTE!
Note the number of shim washers (11) on each spacer (5).
• Lift off the pressure plate (2) and the disc assembly that consists of
3 outer discs (3) and 2 inner discs (4).
• Remove the brass disc (7).
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...