Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 2- 1
General product information – M2
Presentation of the reach trucks
2- General product information – M2
2.1 Presentation of the reach trucks
The reach truck program is intended for handling pallets indoors or
alternatively other types of loads using other load carriers. The trucks
are operated seated in a protected and ergonomic operator position.
The reach trucks are available in different size classes and have as
standard a lifting capacity of up to 2500 kg and a lifting height of up to
11,5 m.
The trucks are equipped with a 48 V electrical system. The travel and
lifting speeds are transistor controlled to provide smooth operations. In
addition, the travel function and the different hydraulic functions have
additional controls which further enhance these features. Different
speeds, steering and cab tilt (optional) can be set using parameters to
give the best possible individual setting for the functions.
2.1.1 Application areas for the reach trucks
The reach trucks are solely designed and manufactured to handle
goods. The trucks should be fitted with the appropriate accessories rel
-
evant to the application.
2.1.2 Prohibited applications for the reach
trucks
The reach trucks are designed for handling goods indoors. Unless the
truck is specially equipped, it is not permitted to use the truck for other
purposes including the following applications:
- In areas that contain dust or gases which can cause fires or ex-
plosions
- As a tow-truck for trailers
- To tow other trucks
- To transport/lift passengers
- To drive on gravel or grass
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...