T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
15- 10 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Travel brake system – 3100.2
Operating description
15.2.1 Releasing the accelerator
The regenerative motor brake is automatically engaged when the
accelerator is released.
The braking force can be set via a parameter by the driver, see C-code
5710.
The motor braking force is regulated progressively in relation to the
speed and the amount the accelerator is released. This functions as fol
-
lows:
• Braking at a high speed, the accelerator is released completely,
gives a high braking force.
• Braking at a low speed, the accelerator is released completely, gives
a low braking force.
• Braking at a high speed, the accelerator is released halfway, gives
medium braking force.
15.2.2 Travel direction selector
The braking force is regulated by the position of the accelerator, i.e. the
more the pedal is pressed down the greater the braking effect.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...