BT REFLEX RR B2-3CC - 45.27.1 Dismantling; Material handling

T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
45- 30 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Instructions for destruction
Hydraulic unit (6100)
45.27.1 Dismantling
• Drain all oil from the hydraulic oil reservoir.
• Remove the oil filter from the oil reservoir.
• Remove the hydraulic lines.
• Remove the oil reservoir.
• Remove the hydraulic unit (motor + pump).
Material handling
Pour the oil into a container intended for oil (classified as hazardous
waste within the EU).
Place the oil filter in the container intended for oil filters.
Place the hydraulic hoses in the container intended for oil-contaminat-
ed material.
Place the reservoir in the container intended PE.
Place the motor together with the pump in the container intended for
complex scrap.
https://www.forkliftpdfmanuals.com/