BT REFLEX RR B2-3CC - 26- Hydraulics - 6000; 26.1 General; 26.2 Symbols

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 26- 1
Hydraulics – 6000
General
26- Hydraulics – 6000
26.1 General
The hydraulics on the truck consist of a pump that sucks oil from the
tank and transports this to the main valve located in the reach carriage.
The main valve distributes oil to the reach cylinder and the mast.
The return oil from the reach cylinder and mast is transported via the
main valve through the filter to the tank.
The return oil from the reach carriage goes directly through the filter to
the tank.
26.2 Symbols
The table explains the symbols used in
the hydraulics diagram.
Symbol Description Symbol Description
Single-acting
hydraulic cylinder
Double-acting
hydraulic cylinder
Directional valve 3/2,
three ports,
two distinct posi-
tions, electromag-
netically controlled
Directional valve 3/4,
four ports,
three distinct posi-
tions, electromag-
netically controlled
Proportional valve Valve,
two ports,
two distinct posi-
tions, electromag-
netically controlled
Counter pressure
valve
Solenoid valve
https://www.forkliftpdfmanuals.com/