BT REFLEX RR B2-3CC - 39.9 Function for diagnostics; 39.9.1 Signal colours

T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
39- 10 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Control/computer equipment – 8700
Function for diagnostics
39.9 Function for diagnostics
In order to access diagnostics, select the “Diagnostic” function. This
can be done using the <Tools | Diagnostic... menu > or using the [Diag
-
nostic] tool button.
NOTE!
If the value “---” is displayed in a field or the status LED lights up red,
communication has been interrupted for some reason and incorrect
data may then be displayed.
NOTE:
The information on the tabs in diagnostics mode depends on which
truck is connected.
39.9.1 Signal colours
The following screenshots have been adapted for improved readability
for printout in black and white.
NOT ACTIVATED
GREEN
RED
https://www.forkliftpdfmanuals.com/