T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
37- 12 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Lifting devices – 7400
Maintenance
37.5.1 Maintenance
• Lubricate the top side of the inner fork as required. Lubricate using
calcium grease (e.g. Q8 Ruvsdael WR2). (1)
• Check the wear on the forks’ underside and wear plate, particularly
on the back. Check inner fork according to ISO 5057, except for
“Fork arm blade and shank” because the inner fork must not be ex
-
posed to wear. (Chapter 1.1). (5)
• Check for hydraulic leaks/damage. Examine the cylinder head for
leakage. (This is easy to see if you remove the outer fork)
• If there is any leakage at the heel of the telescopic forks, they must
be removed immediately. If the couplings are leaking, they should
be tightened or replaced. (2)
• When the wear plate on the underside of the forks is completely
worn down or the outer fork sleeves begin to wear, the wear plate
should be replaced with a new one to prevent damage to the outer
fork sleeves and inner fork.
• Once the outer fork is removed, you can easily check the cylinder
head. (4)
5
2
4
4
4
1
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...