Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 2- 7
General product information – M2
Main components RR B/E 1-8
2.5 Main components
RR
B/E 1-8
1. Hydraulic valves:
The valves are located to provide easy ac-
cess.
2. Battery:
48 V with different Ah values.
3. Recharging connector:
The battery is recharged via this perma-
nently attached recharging connector.
4. Control circuit fuse:
10A, part no. 161640-100.
Fuse for electrical steering wheel:
30 A, part no. 161640-300.
5. Hydraulic unit:
Pump motor, pump and oil tank integrated
in a compact unit.
6. Drive unit with brake:
Drive motor, gears and drive wheel com-
bined into a compact unit. Steering bear-
ings between motor and gears as well as a
360° steering angle which facilitates the
handling of loads.
7. Electrical steering motor:
Mounted with the drive gear to provide a
compact design.
8. Identification plate, truck:
With model designation, serial number,
year of manufacture, weight without bat
-
tery, battery weight, rated capacity, battery
voltage and manufacturer.
9. Operator’s seat:
The seat is fully adjustable to provide opti-
mal operator comfort.
10. Serial number:
The manufacturing number plate fitted to
the chassis.
11. Cover:
Easily swivelled to provide good access for
servicing.
12. Pedals:
Accelerator with optional direction selector,
travel brake and safety pedal.
13. Control console:
The control console can be adjusted to a
suitable height and angle to obtain a com
-
fortable working position. The steering, hy-
draulic functions, horn, height indication,
travel direction and any extra hydraulic
functions are all controlled from this con
-
sole.
14. Instrument panel:
This provides information on the truck’s
running time, time indication, error codes,
travel direction, parking brake, steering an
-
gle, driver identification and battery status.
The instrument panel also houses the
emergency switch off, keypad and switch
-
es for accessories.
15. Mast:
The mast is a clear-view model and is
equipped with an identification plate with
type designation, serial number and date of
manufacture.
16. Electronics:
All the electronics collected in a protected
compartment.
17. Drive motor fuse:
RR B1-3, E1-3:
125 A, part no. 29584.
RR B4-8 and E4-8
160 A part no. 29223.
18. Pump motor fuse:
RR B1-3, E1-3:
200 A, part no. 29673.
RR B4-6 and E4-6:
250 A, part no. 29221.
RR B7-8 and E7-8:
300 A, part no. 29674.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...