T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
15- 12 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Travel brake system – 3100.2
Operating description
15.2.4 Parking brake
The parking brake is activated/is active when:
• The parking brake is activated automatically when the truck is
stopped when driving and the truck brakes to a stop with the help of
the brake pedal.
The brakes are released when the accelerator is pressed down.
• The parking brake is activated automatically with a few seconds of
delay when the driver leaves the truck.
• The parking brake remains active after the ignition switch is
switched on.
15.2.5 Emergency braking
Emergency braking of the truck takes place in the event of a fault with
the control system or a serious fault in the electrical systems.
• The electromechanical disc brake on the drive motor is the primary
emergency brake.
• The motor brake can act with emergency braking under the condi-
tion that the voltage supply works.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...