BT REFLEX RR B2-3CC - 8.2.5 Air direction; 8.2.6 Fuses; 8.2.7 Air filter

T-code Valid from serial number
669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
8- 2 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Cab heating/ventilation – 0630
Air conditioning unit
8.2.5 Air direction
There are four different air vents that can be used to direct the air flow
to avoid fogging the windows and to provide maximum operator com
-
fort.
• Turn control (A) to open/close the vent and (B) to direct the air flow.
• Press button (C) to open/close the vents and (D) to direct the air
flow.
The air vent in the elbow pad cannot be adjusted but can receive
increased airflow by increasing the fan speed and closing vents A, C
and E to some degree.
• Turn control E to increase/decrease airflow to the floor.
The quantity of outside air mixing with the air inside the cabin can be
adjusted by loosening screw F and sliding the plate behind it from side
to side.
8.2.6 Fuses
There are five fuses in the heater. 1 x 5 ampere for the fan and electron-
ics and 4 x 30 amperes for the heating element.
8.2.7 Air filter
Loosen the four screws (A) and remove the cover plate.
Replace the filter with a new one and reinstall the cover plate.
P
P
P
P
B
E
F
A
C
D
5
A
3
0
A
3
0
A
3
0
A
3
0
A
G
A
https://www.forkliftpdfmanuals.com/