T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 24 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Warning codes
24.7 Warning codes
When an error occurs a buzzer sounds and a code is displayed, for 10
seconds, in the right-hand section of the text window D. The error is
also displayed in the text box (G). If the error is still present after one
minute, the buzzer will sound again for two seconds.
This will be repeated until the error is corrected, however the truck can
be driven with all functions, as set out in the following table
WARNING
Ignoring error indication
Jeopardises truck safety.
Always check truck functions before operation.
Character Error
Warning
Code
Description Only two dots on the screen
Error type Truck does not start
Error causes 1. Short circuit, sensor
2. Short circuit, cabling
3. Defect electronic card
Note
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...