Applies from machine no. T-code
713962- 403-414, 669-671, 716-718
Order no. Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 1- 13
Table of contents
Dismantling................................................... 2
31.3.1 Dismantling the cylinder ..................................... 3
Dismantle the rod seal and support ring. ...... 3
31.4.1 Assembling the rod seal and support ring. ......... 3
Dismantling the piston .................................. 4
31.5.1 Fitting the piston in the free lift cylinder .............. 4
Dismantling and assembling the hose rupture
valve 4
Assembling the cylinder................................ 5
Assembly...................................................... 5
Reach cylinder – 6650 32-1
General......................................................... 1
Assembling and dismantling
the reach cylinder..................................... 1
Dismantling................................................... 1
32.3.1 Dismantling the cylinder ..................................... 2
32.3.2 Dismantle the rod seal and the support ring. ..... 2
32.3.3 Assembling the rod seal and the support ring. ... 2
32.3.4 Dismantling the ram ........................................... 3
32.3.5 Assembling the ram ........................................... 3
32.3.6 Assembling the cylinder ..................................... 3
Assembling................................................... 3
Tilt cylinder – 6660.1 33-1
General......................................................... 1
Mast with valve on the fork carriage.............. 2
33.2.1 Dismantling the fork carriage ............................. 2
33.2.2 Dismantling the cylinder ..................................... 3
33.2.3 Dismantling the rod seal ..................................... 3
33.2.4 Dismantling the ram ........................................... 3
33.2.5 Assembling the ram ........................................... 3
33.2.6 Assembling the rod seal ..................................... 4
33.2.7 Assembling the cylinder ..................................... 4
33.2.8 Assembling the fork carriage .............................. 4
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...