EasyManuals Logo

Buell 2007 LIGHTNING Service Manual

Buell 2007 LIGHTNING
661 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #455 background imageLoading...
Page #455 background image
6-18 2007 Buell Lightning: Drive/Transmission
HOME
CLUTCH SHELL BEARING
REPLACEMENT
NOTE
The clutch shell uses a caged needle bearing that corre-
sponds to an inner race installed on the clutch hub.
1. See Figure 6-30. Place clutch shell on support blocks
with sprocket side facing up.
NOTE
The CLUTCH SHELL BEARING REMOVER/INSTALLER
(Part No. B-45926) is clearly marked for removal and installa-
tion purposes.
2. See Figure 6-30. Insert removal end of tool into bearing
assembly and remove bearing from clutch shell.
3. See Figure 6-31. Remove bearing guide from end of
CLUTCH SHELL BEARING REMOVER/INSTALLER
(Part No. B-45926).
4. Place new needle bearing onto installer end of tool and
insert the bearing guide to prevent the bearing from fall-
ing off during installation and to align bearing with clutch
shell.
5. See Figure 6-32. Place clutch shell on support blocks
with sprocket side facing up.
6. Press bearing into clutch shell until tool bottoms on the
shell. This will be the correct installed height.
Figure 6-29. Clutch Shell Bearing Remover/Installer
B-45926
Figure 6-30. Removing Clutch Shell Needle Bearing
1. Removal end of bearing tool
2. Installation end of bearing tool
3. Bearing guide, installer
1
2
3
8813
8812
Figure 6-31. Bearing Installer
Figure 6-32. Installing Clutch Shell Needle Bearing
Clutch Shell Bearing Remover/Installer B-45926
8814
1. Place needle bearing on tool in this location
2. Bearing guide
1
2
Needle bearing
8811

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buell 2007 LIGHTNING and is the answer not in the manual?

Buell 2007 LIGHTNING Specifications

General IconGeneral
Year2007
ManufacturerBuell
ModelLightning
CategoryMotorcycle
Displacement1203 cc
Bore x Stroke88.9 mm x 96.8 mm
Compression Ratio10.0:1
Fuel SystemElectronic fuel injection
Transmission5-speed
Final DriveBelt
Rear SuspensionShowa shock absorber
Rear BrakesSingle disc, 1-piston caliper
Engine TypeV-Twin
IgnitionDigital
Front SuspensionShowa inverted fork
Front BrakesSingle disc, 6-piston caliper
Front Tire120/70 ZR17
Rear Tire180/55 ZR17
Wheelbase52.0 inches
Seat Height30.1 inches
Dry Weight395 lbs
Fuel Capacity14.5 liters

Related product manuals