17.2 Flash memory
The data logger operating system is stored in a separate section of flash memory. To update the
operating system, see Updating the operating system(p. 163).
Serial flash memory holds the CPU drive, web page, and data logger settings. Because flash
memory has a limited number of write/erase cycles, care must be taken to avoid continuously
writing to files on the CPU drive.
17.2.1 CPU drive
The serial flash memory CPU drive contains data logger programs and other files. This memory is
managed in File Control.
NOTE:
When writing to files under program control, take care to write infrequently to prevent
premature failure of serial flash memory. Internal chip manufacturers specify the flash
technology used in Campbell Scientific CPU: drives at about 100,000 write/erase cycles. While
Campbell Scientific's in-house testing has found the manufacturers' specifications to be very
conservative, it is prudent to note the risk associated with repeated file writes via program
control.
See also SerialFlashErrors(p. 209).
Also, see System specifications(p. 239) for information on data logger memory.
17. Data memory89
To Next Page
Loading...
Need help?
General
