Campbell CR310 User Manual

Where to find:
l
Settings Editor tab in Device Configuration Utility: Cellular > Signal Quality
23.3.59.13 CellRSSI
CellRSRP
Specifies the signal strength of the modem in -dBm. For 3G, this is RSSI (Received Signal Strength
Indicator). For 4G, this is RSRP (Reference Signal Received Power). Updated when queried by
your data logger support software or a program. Ranges expected for Signal Strength for 3G/4G:
Excellent: -70dBm or less (3G), -90dBm or less (4G)
Good: -70dBm to -85dBm (3G), -90dBm to -105dBm (4G)
Fair: -86dBm to -100dBm (3G), -106dBm to -115dBm (4G)
Poor: >-100dBm (3G), >-115dBm (4G)
l
Long data type
l
Read only
Where to find:
l
Settings Editor tab in Device Configuration Utility: Cellular > Signal Strength
23.3.59.14 CellState
Specifies the current communications state with the cell modem and the network. The following
states are available:
l
Power off
l
Powering up
l
Powered up
l
SIM authorized
l
Setting baud rate
l
Waiting for baud rate
l
Baud rate set
l
Baud rate failure
l
Power off. Waiting for retry
l
Powered up. SIM auth failure
l
Querying modem
l
Waiting for network registration
l
Configuring modem
l
Dialing
23. Information tables and settings (advanced)227

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English