Antenna Connector: Reverse Polarity SMA (RPSMA)
Antenna (shipped with data logger): Unity gain (0 dBd), 1/2 wave whip, omnidirectional. Features
an articulating knuckle joint that can be oriented vertically or at right angles
Supported Technologies: 802.11 b/g/n, WPA/WPA2-Personal, WPA/WPA2-Enterprise Security,
WEP
Client Mode: WPA/WPA2-Personal and Enterprise, WEP
Access Point Mode: WPA2-Personal
Receive Sensitivity: -97 dBm
For WiFi additional current contribution specifications, see Power requirements(p. 240).
24.8.2 RF radio option specifications
Antenna Terminal: Reverse Polarity SMA (RPSMA)
Radio Type
l
RF407, RF412, and RF427: Frequency-Hopping Spread-Spectrum (FHSS)
l
RF422: SRD860 Radio with Listen Before Talk (LBT) and Automatic Frequency Agility (AFA)
Frequency
l
RF407: 902 to 928 MHz (US, Canada)
l
RF412: 915 to 928 MHz (Australia, New Zealand)
l
RF422: 863 to 870 MHz (Europe, Middle East, and Africa)
l
RF427: 902 to 907.5 MHz/915 to 928 MHz (Brazil)
Transmit Power Output (software selectable)
l
RF407 and RF412: 5 to 250 mW
l
RF422: 2 to 25 mW
l
RF427: 5 to 250 mW
Channel Capacity
l
RF407: Eight 25-channel hop sequences sharing 64 available channels.
l
RF412: Eight 25-channel hop sequences sharing 31 available channels.
l
RF422: Ten 30-channel hop sequences (default), software configurable to meet local
regulations; 10 sequences for reducing interference through channel hop.
l
RF427: Eight 25-channel hop sequences sharing 43 available channels.
24. CR300 series specifications250
To Next Page
Loading...
Need help?
General
