Campbell CR310 User Manual

20.2.2 Other security measures reviewed by Device
Configuration Utility
Many of these settings can be accessed from the Device Configuration UtilitySettings Editor tab.
Settings are organized in tabs and can be searched for.
20.2.2.1 PakBus TCP Enabled
By default, PakBus TCP communications are enabled. Normally this would not be disabled as it
would prevent data logger support software from connecting to a data logger using TCP.
See Device Configuration Utility > Settings Editor > Network Services tab.
20.2.2.2 Account manager
The Security Check only checks password strength when entering passwords in Device
Configuration Utility for the .csipasswd file. It does no other checking.
See Device Configuration Utility > Settings Editor > Advanced tab.
20.2.2.3 IP Broadcast Filtered
Set to one if all broadcast IP packets should be filtered from IP interfaces. Do not set this if you
use the IP discovery feature of the Device Configuration Utility or of LoggerLink. If this is set to
one, the data logger will fail to respond to the broadcast requests.
See Device Configuration Utility > Settings Editor > Advanced tab.
20.2.2.4 Other communications protocols
Specific protocols such as PPP or MQTT have settings that involve security. The Security Check
does not consider these settings other than password strength.
20.2.3 TLS
Transport Layer Security (TLS) is an internet communications security protocol. TLS settings are
necessary for server applications, not for client applications. The primary reason for using TLS is
to encrypt communications between a server and its clients. Using TLS is recommended when
20. Installation147

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English