Campbell CR310 User Manual

23.1.4 RecNum
Record number is incremented when any one of the DataTableInfo fields change, for example
SkippedRecord.
23.1.5 SecsPerRecord
Reports the data output interval for a data table.
23.1.6 SkippedRecord
Reports how many times records have been skipped in a data table. Array elements are in the
order that data tables are declared in the CRBasic program. Enter 0 to reset.
23.1.7 TimeStamp
Scan time that a record was generated.
l
NSEC data type
23.2 Status table system information
The Status table is an automatically created data table. View the Status table by connecting the
data logger to your computer (see Making the software connection(p. 70) for more information).
Most fields in the Status table are read only and of a numeric data type unless noted. Error
counters (for example, WatchdogErrors or SkippedScan) may be reset to 0 for troubleshooting
purposes.
Status table values may be accessed programatically using SetStatus() or
Tablename.Fieldname syntax. For example: Variable = Status.Fieldname. For
more information see:https://www.campbellsci.com/blog/programmatically-access-stored-
data-values .
23.2.1 Battery
Voltage (VDC) of the battery powering the system. Updates once per minute, when viewing the
Status table, or programatically.
23. Information tables and settings (advanced)204

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English