Campbell CR310 User Manual

23.3.60.1 RadioAvailFreq
Displays the bitfield of the frequencies that are available in the module’s region of operation.
l
String data type
l
Read only
Where to find:
l
Settings Editor tab in Device Configuration Utility: Radio > Available Frequencies
23.3.60.2 RadioChanMask
The channel mask allows channels to be selectively enabled or disabled. This allows you to avoid
using frequencies that experience unacceptable levels of RF interference.
l
String data type
Where to find:
l
Settings Editor tab in Device Configuration Utility: Radio > Radio Channel Mask
23.3.60.3 RadioEnable
Global control for the internal radio module.
Where to find:
l
Settings Editor tab in Device Configuration Utility: Radio > Radio Enable
23.3.60.4 RadioHopSeq
Specifies the radio channel hop sequence. This setting must match in all radios in the same RF
network. This setting can also be used to prevent radios in one RF network from listening to
transmissions of another.
l
Long data type
Where to find:
l
Settings Editor tab in Device Configuration Utility: Radio > RFHop Sequence
23. Information tables and settings (advanced)229

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English