Campbell CR310 User Manual

NOTE:
A list of Settings fieldnames is also available from the data logger terminal mode using
command F.
23.3.59.1 CellAPN
Specifies the APN, and is required. The APN is the gateway between the cell network and the
internet. APN must be obtained from your cellular network provider.
l
String data type
Where to find:
l
Settings Editor tab in Device Configuration Utility: Cellular > APN
23.3.59.2 CellEnabled
Global control for cell modem. This overrides the power schedule setting and CRBasic
IPNetpower instruction. 0 Disabled, 1 or <>0 Enabled.
l
Boolean data type
Where to find:
l
Settings Editor tab in Device Configuration Utility: Cellular > Cell Modem Enable
23.3.59.3 CellInfo
Cellular network/state information. Reports the cellular IP address, default gateway, DNS,
network state, cell carrier, connection type, phone number associated with the SIM card, and
data usage.
l
String data type
l
Read only
Where to find:
l
Settings Editor tab in Device Configuration Utility: Cellular > Diagnostic Info
23. Information tables and settings (advanced)223

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English