Campbell CR310 User Manual

l
Long data type, where:

o
0 = Join network

o
1 = Create network

o
4 = Disable network
23.3.61.6 WiFiEAPMethod
The EAP Method must be chosen to match the EAP method being used by the Enterprise
Security network. The inner EAP Methods supported are MSCHAPv2, MSCHAP, CHAP, and PAP.
l
Long data type
23.3.61.7 WiFiEAPPassword
If joining an Enterprise Security-enabled network enter password here.
l
String data type
23.3.61.8 WiFiEAPUser
If joining an Enterprise Security-enabled network enter user name here.
l
String data type
23.3.61.9 Networks
Lists the networks available in the area. Information listed for each network is shown as {SSID,
RSSI / Signal Strength, Channel, Security}. Sometimes areas are covered by multiple access points
configured with the same network name (SSID). In that case multiple unique access points
possessing the same network name (SSID) may be listed here.
l
String data type
l
Read only
23.3.61.10 WiFiEnable
Set to enable or disable the WiFi service. By default, WiFi is enabled. To disable, set the
Configuration option to Disable. 0 Disabled, 1 or <>0 Enabled.
l
Boolean data type
23. Information tables and settings (advanced)236

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English