Campbell CR310 User Manual

16. Working with data
16.1 Default data tables
By default, the data logger includes three tables: Public, Status, and DataTableInfo. Each of these
tables only contains the most recent measurements and information.
l
The Public table is configured by the data logger program, and updated at the scan interval
set within the data logger program. It shows measurement and calculation results as they
are made.
l
The Status table includes information about the health of the data logger and is updated
only when viewed.
l
The DataTableInfo table reports statistics related to data tables. It also only updates when
viewed.
l
User-defined data tables update at the schedule set within the program.
For information on collecting your data, see Collecting data(p. 77).
Use these instructions or follow the Connect Window tutorial to monitor real-time data.
LoggerNet users, select the Main category and Connect on the LoggerNet toolbar, then select
the data logger from the Stations list, then click Connect . Once connected, select a table to
view in the Table Monitor.
PC400 users, click Connect , then Monitor Data. When this tab is first opened for a data logger,
values from the Public table are displayed. To view data from other tables, click Add , select a
table or field from the list, then drag it into a cell on the Monitor Data tab.
16. Working with data76

Campbell CR310 Specifications

General

Brand	Campbell
Model	CR310
Category	Data Loggers
Language	English