determined by the number and configuration of output processing instructions that are
included as part of the DataTable() declaration.
regulator
A device for conditioning an electrical power source. Campbell Scientific regulators typically
condition AC or DC voltages greater than 16 VDC to about 14 VDC.
resistance
A feature of an electronic circuit that impedes or redirects the flow of electrons through the
circuit.
resistor
A device that provides a known quantity of resistance.
resolution
The smallest interval measurable.
ring memory
A memory configuration that allows the oldest data to be overwritten with the newest data.
This is the default setting for data tables.
ringing
Oscillation of sensor output (voltage or current) that occurs when sensor excitation causes
parasitic capacitances and inductances to resonate.
RMS
Root-mean square, or quadratic mean. A measure of the magnitude of wave or other
varying quantities around zero.
RNDIS
Remote Network Driver Interface Specification - a Microsoft protocol that provides a virtual
Ethernet link via USB.
Appendix C. Glossary284
To Next Page
Loading...
