Handling rolls
Selecting the Paper T ype (Roll)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
• After you load the roll, the printer automatically shows a menu for selection of the paper type on the
Display Screen , unless a barcode has been printed on the roll or you have activated automatic detection
of the remaining roll paper .
• Select the paper length, unless a barcode has been printed on the roll and you have deactivated the
automatic detection function of the remaining roll paper . ( → P .125)
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Paper Settings , and then press ▼ .
MAIN MENU
Paper Settings ↓
3. Press ◄ or ► to select Roll Media T ype , and then press ▼ .
Paper Settings
Roll Media T ype ↓
4. Press ◄ or ► to select the paper type, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Roll Media T ype
= Plain Paper
Note
• For details on paper types, see the Paper Reference Guide . ( → P .107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper , it may
cause feed errors and af fect the printing quality .
5. Press the Online button to bring the printer online.
124 Handling Paper
To Next Page
Loading...
Need help?
General