Network Setting (Windows)
Specifying the Frame T ype Using the Printer Control Panel
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Interface Setup , and then press ▼ .
MAIN MENU
Interface Setup ↓
3. Press ◄ or ► to select NetW are , and then press ▼ .
Interface Setup
NetW are ↓
4. Press ◄ or ► to select NetW are , and then press ▼ .
NetW are
NetW are ↓
5. Press ◄ or ► to select On and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
NetW are
= On
Return to the NetW are menu.
6. Press ◄ or ► to select Frame T ype , and then press ▼ .
NetW are
Frame T ype ↓
7. Press ◄ or ► to select your frame type, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Frame T ype
= Ethernet 802.3
Return to the NetW are menu.
8. Press ◄ or ► to select Print Service , and then press ▼ .
NetW are
Print Service ↓
9. Press ◄ or ► to select your print service, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Print Service
= RPrinter
Return to the NetW are menu.
Network Setting 585
To Next Page
Loading...
Need help?
General