Responding to Messages
Error Messages
W arning messages
The printer status is indicated on the top line of the Display Screen , and the warning message on the bottom
line of the Display Screen .
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
• GARO Wxxxx (x represents a number) (→P .759)
• Ink Lvl: Chk xx (xx represents an ink color) (→P .750)
• Check Printout (→P .757)
• Feed Limit.. (→P .747)
• Consumables Low (→P .761)
• Repl Consumables (→P .761)
• MTCart Full Soon (→P .758)
• Paper Mismatch (→P .735)
• PaprSiz Mismatch (→P .736)
• PaprT yp Mismatch (→P .735)
Error messages (if action can be taken)
Check the message and take the appropriate action.
• Need 10 in or Larger Roll (→P .737)
• Need A4/Letter V ert. or Larger (→P .737)
• Press OK and recalibrate (→P .755)
• No Ink Left (→P .752)
• Ink T ank / Check xx (xx represents an ink color) (→P .750)
• Ink T ank / Replace xx (xx represents an ink color) (→P .752)
• T op Cover / Please Close (→P .759)
• Online Key / and recalibrate (→P .754)
• Cassette Undetected (→P .739)
• Cassette Selectd / Press ↑ Key (→P .739)
• Load Papr in Cas / Press Online. (→P .739)
• Calibration multi-sensor err (→P .733)
• Media Check / Please Cancel (→P .739)
• Paper Feed Slot / SpcfdPapr NotFit (→P .739)
• Check Supported Paper . (→P .741)
• Sheets Loaded / Press ↓ T o Eject (→P .740)
• T ray Selected (→P .740)
• Power On / Again (→P .760)
• Power On / Again / Multi-sensor Err (→P .761)
• Not Enough Ink (→P .751)
• Cannot update rmware (→P .761)
• Printhead / Please Check (→P .757)
• Printhead X / Replace Printhd (x is Left or Right) (→P .757)
• Printhead X / Check Nozzles (x is Left or Right) (→P .756)
• Maint Cartridge / Replace Cart (→P .758)
• Maint Cartridge / Load Cartridge (→P .758)
• Cutting Error (→P .748)
• Paper Mismatch / ReplcPap:Press↓ (→P .733)
Error Message 731
To Next Page
Loading...
Need help?
General