Other useful settings
Cutting Roll Paper After Printing (Mac OS X)
This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how
to print a cut line to cut the paper manually .
Note
• The auto cut function is activated on the printer by factory default and when the printer driver is installed.
Follow the steps below to reactivate the function once disabled, or select the setting for printing a
cut guideline instead.
1. Choose Page Setup in the application menu to display the Page Attribute dialog box.
2. Select the printer in the B Format for list.
3. Choose the original size in the C Paper Size list.
4. Click F OK to close the dialog box.
5. Choose Print in the application menu.
6. Access the Page Setup pane.
7. Click Roll Paper in the A Media Source list.
Enhanced Printing Options 451
To Next Page
Loading...
Need help?
General