Adjusting the Printhead
Adjusting the Printhead Height
If paper rubs against the printer or the edge is wrinkled from rubbing, adjusting the Printhead height may
improve results.
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Med.Detail Set. , and then press ▼ .
MAIN MENU
Med.Detail Set. ↓
3. Press ◄ or ► to select the type of paper , and then press ▼ .
Med.Detail Set.
Plain Paper ↓
4. Press ◄ or ► to select Head Height , and then press ▼ .
Plain Paper
Head Height ↓
5. Press ◄ or ► to select Printhead , and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Head Height
= Automatic
Important
• If you switch to another type of paper after printing, reset the Printhead height to Automatic .
614 Maintenance
To Next Page
Loading...
Need help?
General