Messages regarding ink
Not Enough Ink
Cause Corrective Action
The ink level is low , so you cannot clean the
Printhead .
Open the Ink T ank Cover and replace the Ink T ank
that is low with a new Ink T ank .
( → P .642)
The ink level is low , so there may not be enough ink
to nish printing.
Open the Ink T ank Cover and replace the Ink T ank
that is low with a new Ink T ank .
( → P .642)
Y ou can print until the ink runs out by pressing the
Online button. However , if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer .
1. No Ink Left is displayed and printing stops. Press
the Stop/Eject button to cancel printing, or open
the Ink T ank Cover , replace the ink tank that is low
with a new one, and continue printing. However ,
note that because printing is paused, colors may
be slightly dif ferent. ( → P .642)
2. No Ink Left / Canceling page.. is displayed and
printing stops. After the paper is ejected, open the
Ink T ank Cover and replace the ink tank that is low
with a new one. ( → P .642)
Error Message 751
To Next Page
Loading...
