Messages regarding paper
Roll Paper Chk / Check W idth/Spcr
Cause Corrective Action
Insert the paper and Spacer for Borderless Printing
rmly all the way into the printer .
When using A2 rolls, attach the Spacer for Borderless
Printing before loading the roll.
( → P .144)
The paper is loaded askew .
When using sizes other than A2, remove the Spacer
for Borderless Printing before loading the roll.
( → P .144)
The paper loaded is not compatible with borderless
printing.
Load paper compatible with borderless printing and
try printing again. Paper you can use for borderless
printing is restricted to particular types of paper and
rolls of particular widths. For information on types of
paper compatible with borderless printing, refer to the
Paper Reference Guide . ( → P .107)
Because paper expands or contracts depending on
the environment of use, it may become narrower or
wider than the supported width for borderless printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper , see the
Paper Reference Guide . ( → P .107)
Error Message 743
To Next Page
Loading...
Need help?
General