Printer Specications
Borderless printing (*2) Printable area (rolls)
Entire surface
Print area
Oversized (*2), (*3) Printable area
Entire surface
Supported width for borderless printing 10 inches (254 mm), JIS B4 (257 mm), A3+ (329 mm),
14 inches (356 mm), 16 inches (407 mm), ISO A2/A3
(420 mm) (*4), 17 inches (432 mm)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .107)
*2: Printing may not be possible in some cases, depending on the type and size of paper .
*3: Load paper at least 6 mm (0.24 in) wider and 6 mm higher than the size selected in Page Size for roll
paper and the Cassette . Or , load paper at least 26 mm (1.0 in) higher for the tray .
*4: Borderless printing requires the Spacer for Borderless Printing .
Paper capacity ( Cassette )
Paper size
Paper type
A4, Letter
13×22 in A3 17×22 in A2
Plain Paper 250 sheets 100 sheets 50 sheets
Coated Paper 200 sheets 100 sheets 50 sheets
Photo Paper Plus 20 sheets 20 sheets -
Premium Matte Paper 30 sheets 20 sheets -
Glossy Paper 100 sheets 50 sheets -
• The preceding information is a guideline for the maximum capacity . Load the paper making
sure not to exceed the Maximum Capacity Line of the Cassette . ( → P .19)
• The maximum paper capacity varies depending on the paper type. For more
information, see the Paper Reference Guide . ( → P .107)
Maximum stacking capacity
The Output T ray can accommodate up to 20 sheets of A2/A3+ paper or 50 sheets of A3/A4 paper .
The maximum stacking capacity varies depending on the paper type. For more information, see the Paper
Reference Guide . ( → P .107 )
76 Printer Parts
To Next Page
Loading...
Need help?
General