Canon imagePROGRAF iPF5100 - Paper Settings

Control Panel
Paper Settings
Setting Item Description, Instructions
Cas Paper T ype ( *1 ) Choose the type of paper in the Cassette .
( → P .167)
Cas Paper Size Specify the size of paper in the Cassette .
( → P .170)
Manual Pap.T ype ( *1 ) Choose the type of paper in the tray .
( → P .168)
Manual Pap.Size Choose the size of paper in the tray .
( → P .193)
Roll Media T ype ( *1 ) Choose the type of roll.
( → P .124)
Chk Remain.Roll Choose On to print a barcode at the end of a roll before you remove it. The
printed barcode can be used in managing the amount of roll paper left. Choose
Off if you prefer not to print the barcode.
Roll Length Set Displayed if Chk Remain.Roll is On .
If a barcode is not printed on rolls, specify the roll length. The roll length is
displayed in meters (1.0-91.0 m) or feet (1-300 ft.), depending on the setting
in Length Unit .
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .107) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the Media Conguration T ool from the User Software CD-ROM or if
you change paper information by using the Media Conguration T ool . See the Media Conguration
T ool Guide (Windows) or Media Conguration T ool Guide (Macintosh).
48 Printer Parts