Cleaning the Printer
Cleaning Spurs Used in Paper Feeding
If white dots about 1 mm (0.039 in) apart appear on printed documents in the direction paper is fed, clean
the spurs (a).
During spur cleaning, a Cleaning sheet fed from the T op Paper Feed Slot is repeatedly advanced and
retracted to clean the spurs.
Note
• Spur cleaning requires a Cleaning sheet .
• If the spurs are quite soiled, executing cleaning once may not be enough to clean them completely .
Execute cleaning again if one time is not ef fective.
• If a roll is loaded, rewind the roll before this procedure. ( → P .146)
Important
• Do not fold the Cleaning sheet .
• Do not use a frayed Cleaning sheet or Cleaning sheet that has become very dirty .
• If the Cleaning sheet is warped, straighten it before use.
• T o cancel cleaning, press the Stop/Eject button.
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Maintenance , and then press the ▼ button.
3. Press ◄ or ► to select Spur Cleaning , and then press the ▼ button.
4. Press ◄ or ► to select Y es , and then press the OK button.
Maintenance 675
To Next Page
Loading...
Need help?
General