Cleaning the Printer
Cleaning Inside the T op Cover
Clean inside the T op Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the T op Cover in the following situations to ensure optimal operation.
• If the printed surface or the underside of paper is dirty after printing
• After you have used up a roll
• After borderless printing
• After printing on small paper
• After printing on paper that generates a lot of cutting debris
• If you have replaced the roll
Important
• If the Platen inside the T op Cover becomes dirty , it may soil the underside of paper . W e recommend
always cleaning the Platen after borderless printing or printing on small paper .
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Maintenance , and then press ▼ .
MAIN MENU
Maintenance ↓
3. Press the ◄ or ► button to select Clean Platen , and then press ▼ .
Maintenance
Clean Platen ↓
4. Press ◄ or ► to select Y es , and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Clean Platen
= Y es
The Carriage is moved so that you can clean the Platen .
5. Open the T op Cover .
670 Maintenance
To Next Page
Loading...
Need help?
General