Printer parts
i. Output T ray Extension
An extension to prevent ejected paper from falling to the oor . Pull out the extension to match the
paper size before printing on sheets.
j. Paper Alignment Line
When loading heavyweight paper , ensure the paper edge is parallel to this line.
k. Cutter Unit
A round-bladed cutter for automatic roll cutting. The cutter is retracted inside when not cutting.
l. Cassette
Load sheets in this tray .
m. Maintenance Cartridge
Absorbs excess ink.
n. Ink T ank Cover
Open this cover to replace Ink T ank . ( → P .15)
o. Front T ray Guides
Lifting the V ertical Paper Guides when printing from the Front Paper Feed Slot will automatically raise
the guides, making it easier to load paper in the Front Paper Feed Slot .
Printer Parts 9
To Next Page
Loading...
