Canon imagePROGRAF iPF5100 - Page 283

Print quality and color settings
1 1. Make sure the width of the loaded roll is displayed in the B Roll Paper W idth list-in this case, 10
in. (254.0mm) .
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper W idth , click L Printer
Information on the Main pane to update the printer information.
12. Make sure C Page Size on the Page Setup pane shows the original size as specied in C
Paper Size in the Page Attribute dialog box-in this case, 10"x12" .
13. Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P .516)
14. Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P .517)
Enhanced Printing Options 269