Printing enlargements or reductions
15. Click F Scaling and enter “120.”
Note
• Y ou can specify enlargement that exceeds the paper size, but in this case, the portion of f the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner . In this case, you can center originals by selecting F Print Centered on
the Finishing pane.
16. Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P .542)
Enhanced Printing Options 289
To Next Page
Loading...
Need help?
General