Canon imagePROGRAF iPF5100 - Page 58

Control Panel
First Level
Second Level
Third Level Fourth Level
Fifth Level Sixth Level
Job Status OK
CANCELED
Print Start T ime yyyy/mm/dd
hh:mm
Print End T ime yyyy/mm/dd
hh:mm
Print T ime xxx sec.
Print Size xxxxxxxx
sq.mm
Media T ype
Interface USB
Network
IEEE1394
Ink
Consumption
xx.x ml
Counter Cut Count
*1: Displayed if a roll is loaded.
*2: Displayed if the Roll Feed Unit is installed.
*3: Displayed if Chk Remain.Roll is On .
*4: Displayed if IP Mode is Automatic .
*5: Only these menus are displayed during printing.
*6: For information on the types of paper Media Conguration T ool the printer supports, refer to the Paper
Reference Guide . ( → P .107) The paper type setting in the printer driver and related software (as well as
on the Control Panel ) is updated when you install the Media Conguration T ool from the User Software
CD-ROM or if you change paper information by using the . See the Media Conguration T ool Guide
(Windows) or Media Conguration T ool Guide (Macintosh).
*7: A vailable only if Auto Detect is Off .
*8: A vailable only if NetW are is On .
*9: Follows the setting in Date Format .
*10: Displayed if paper is loaded in the tray .
*1 1: This menu is only displayed during printing.
*12: Not displayed if a roll or a sheet has been fed.
44 Printer Parts