Color adjustment
Follow these steps to execute color calibration.
1. Load paper compatible with color calibration.
When using sheets, load paper A4/Letter (vertical, 8.5×1 1 in [210.0×297.0 mm] ) or larger .
One sheet is required.
When using a roll, load a roll 10 inches (254 mm) or wider .
• Loading and Printing on Sheets in the Cassette (→P .80)
• Loading and Printing on Rolls (→P .82)
• Loading and Printing on Sheets in the Paper Feed Slot (→P .86)
2. Press the Menu button to display MAIN MENU .
3. Press ◄ or ► to select Adjust Printer , and then press the ▼ button.
MAIN MENU
Adjust Printer ↓
4. Press ◄ or ► to select Calibration , and then press ▼ .
Adjust Printer
Calibration ↓
5. Press ◄ or ► to select Auto Adjust , and then press the ▼ button.
Calibration
Auto Adjust ↓
6. Press ◄ or ► to select Y es , and then press the OK button.
Auto Adjust
= Y es
After the printer measures environmental conditions and checks the paper , a test pattern for color
calibration is printed. An adjustment value based on the results of printing is set automatically .
After adjustment is complete, the printer goes online or of ine automatically .
630 Maintenance
To Next Page
Loading...
