Printheads
18. Close the T op Cover .
Please W ait.. is shown on the Display Screen , and ink lls the system.
Replace P .head
Please W ait..
After about ten minutes, the Printhead alignment will be automatically adjusted, and the printer
will go online.
Important
• Never remove an Ink T ank while the system is lling with ink.
• If Auto Print is Off in the printer menu, the Printhead alignment will not be adjusted. In this case,
adjust the alignment after Printhead replacement by accessing Advanced Adj. in Auto Head
Adj. ( → P .610 )
660 Maintenance
To Next Page
Loading...
Need help?
General