Maintenance Cartridge
9. Hold the Output T ray on both sides by the near end. Aligning the Output T ray with the guides (a),
insert it into the printer until it locks in place.
10. Press the Information button.
Initialization of the new Maintenance Cartridge takes about ve seconds, after which the printer
returns to the mode before replacement of the Maintenance Cartridge . If Maint Cartridge /
Replace Cart is displayed, printing is disabled. Make sure that the Maintenance Cartridge
is installed correctly .
If the printer was in Menu mode or an error message was shown on the Display Screen , the
printer goes online. If a print job was in progress when the Maintenance Cartridge was replaced,
printing is resumed.
Important
• Do not remove the Maintenance Cartridge during about the rst ve seconds after the printer goes
back online. This may damage the Maintenance Cartridge .
• If you replace the Maintenance Cartridge when the printer is of f, do not remove the Maintenance
Cartridge during about the rst ve seconds after you turn the printer on again after replacement.
This may damage the Maintenance Cartridge .
666 Maintenance
To Next Page
Loading...
Need help?
General