Printer Specications
Note
• Printable area: The area that can be printed.
• Guaranteed Print Area: W e recommend printing within this area.
• T o print so that your original matches the print area exactly , use an oversized paper size that includes
the required margin. ( → P .305)
• Y ou can choose a bottom margin of 3 mm or 23 mm when printing from the T op Paper Feed Slot .
In the printer driver , choosing Manual in Media Source sets the bottom margin at 23 mm. On the
other hand, choosing Manual (3mm margins) in Media Source sets the bottom margin at 3 mm,
which provides a larger area for printing.
However , the option Manual (3mm margins) is not available with the following paper .
• Fine Art Photo Paper
• Fine Art Heavyweight Photo Paper
• Fine Art T extured Paper
• The types of paper listed above may be updated, in some cases.
For details on paper types, see the Paper Reference Guide . ( → P .107)
• If you set the bottom margin at 3 mm, images in the bottom margin may be distorted.
In this case, choose Manual in Media Source to set the bottom margin at 23 mm.
Rolls
• Printable Area:
A margin of 3 mm (0.12 in) on all sides is required. A margin of 3 mm (0.12 in) on the top, bottom, and
both sides is required. During borderless printing, the margin on all sides is 0 mm. For information on
paper compatible with borderless printing, see the Paper Reference Guide . ( → P .107)
• Recommended print area:
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right
sides is required.
Note
• Printable area: The area that can be printed.
• Guaranteed Print Area: W e recommend printing within this area.
• T o print so that your original matches the print area exactly , use an oversized paper size that includes
the required margin. ( → P .305 )
Printer Parts 79
To Next Page
Loading...
Need help?
General