SECTION 1
1-14
MACHINE LAY-OUT
The clamshell switching over valve has to be set to
“clamshell” position. In this way, the bucket cylinder
is hydraulically locked.
Assemble the overall lights on the dipper.
Connect the overall lights to outer socket, installed
on the frame.
Raise the stabilizer blade completely.
Attach the reflective strips on the stabilizer blade.
Raise the stabilizers completely (optional). They
have to stay in vertical position.
Switch off the working floodlamps.
Lock the upper structure by means of undercar-
riage.
Activate the “Road travel” mode (1).
On machines equipped with clamshell.
Install the safety pin (2).
Position the clamshell into the suitable support (3) of
the undercarriage.
18
19
To Next Page
Loading...
