Check Point UTM-1 Edge - Page 197

Configuring Network Settings
Chapter 6: Managing Your Network 183
Adding and Editing VLANs
For information on adding and editing port-based VLANs, see Adding and Editing Port-
Based VLANs on page
183.
For information on adding and editing tag-based VLANs, see Adding and Editing Tag-
Based VLANs on page
185.
For information on adding and editing VAPs, see Configuring Virtual Access Points on
page
294.
For information on adding and editing WDS links, see Configuring WDS Links on page
298.
Adding and Editing Port-Based VLANs
To add or edit a port-based VLAN
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Do one of the following:
• To add a VLAN, click Add Network.
• To edit a VLAN, click Edit in the desired VLAN’s row.