Using the Traffic Monitor
310 Check Point UTM-1 Edge User Guide
The selected report appears in the Traffic Monitor page.
3. To refresh all traffic reports, click Refresh.
4. To clear all traffic reports, click Clear.
Note: The firewall blocks broadcast packets used during the normal operation of
your network. This may lead to a certain amount of traffic of the type "Traffic
blocked by firewall" that appears under normal circumstances and usually does not
indicate an attack.
Exporting General Traffic Reports
You can export a general traffic report that includes information for all enabled networks
and all defined QoS classes to a *.csv (Comma Separated Values) file. You can open and
view the file in Microsoft Excel.
To export a general traffic report
1. Click Reports in the main menu, and click the Traffic tab.
The Traffic Monitor page appears.
2. Click Export.
A standard File Download dialog box appears.
3. Click Save.
The Save As dialog box appears.
4. Browse to a destination directory of your choice.
5. Type a name for the configuration file and click Save.
A *.csv file is created and saved to the specified directory.
To Next Page
Loading...
