Setting Up Your UTM-1 Appliance as a VPN Server
482 Check Point UTM-1 Edge User Guide
The secret can contain spaces and special characters. It is used to secure L2TP
connections for all users.
In addition to entering this secret, each L2TP user will have to authenticate with a
username and password.
For information on defining users with VPN access permissions, see Setting Up
Remote VPN Access for Users on page
553.
4. To allow authenticated users to bypass the default firewall policy and access
your internal network without restriction, select the Bypass default firewall
policy check box.
User-defined rules will still apply to the authenticated users.
5. Click Apply.
The L2TP VPN Server is enabled for the specified connection types.
Installing SecuRemote
If you configured the SecuRemote Internal VPN Server, you must install the
SecuRemote/SecureClient VPN Client on all internal network computers that should be
allowed to remotely access your network via SecuRemote connections.
To install SecureClient/SecuRemote
1. Click VPN in the main menu, and click the VPN Server tab.
The VPN Server page appears.
2. Click the Download link.
The VPN-1 SecuRemote for UTM-1 page opens in a new window.
3. Follow the online instructions to complete installation.
SecureClient/SecuRemote is installed.
For information on using SecureClient/SecuRemote, see the User Help. To access
SecureClient/SecuRemote User Help, right-click on the VPN Client icon in the
taskbar, select Settings, and then click Help.
To Next Page
Loading...
