Adding and Editing Users
548 Check Point UTM-1 Edge User Guide
In this field… Do this…
Expires On To specify an expiration time for the user, select this option and specify
the expiration date and time in the fields provided.
When the user account expires, it is locked, and the user can no longer
log on to the UTM-1 appliance.
If you do not select this option, the user will not expire.
Table 114: Set User Permissions Fields
In this field... Do this...
Administrator Level Select the user’s level of access to the UTM-1 Portal.
The levels are:
• No Access: The user cannot access the UTM-1 Portal.
• Read Only: The user can log on to the UTM-1 Portal, but
cannot modify system settings or export the appliance
configuration via the Setup>Tools page. For example, you
could assign this administrator level to technical support
personnel who need to view the Event Log.
• Users Manager. The user can log on to the UTM-1 Portal and
add, edit, or delete "No Access"-level users. However, the
user cannot modify other system settings. For example, you
could assign this administrator level to clerks who need to
manage HotSpot users.
• Read/Write: The user can log on to the UTM-1 Portal and
modify system settings.
The default level is No Access.
The “admin” user’s Administrator Level (Read/Write) cannot be
changed.
To Next Page
Loading...
