Cisco 2100 Series Configuration Guide

Index
IN-7
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
supported devices 4-69
viewing neighbors
using the CLI
4-78 to 4-79
using the GUI 4-73 to 4-77
viewing traffic information
using the CLI
4-78
using the GUI 4-76
Cisco Discovery Protocol parameter 4-73
Cisco high-power switches 7-72
Cisco Logo parameter 10-10
Cisco NAC Appliance 6-55
CiscoSecure Access Control Server (ACS) 5-4
Cisco Unified Wireless Network (UWN) Solution
described
1-2 to 1-4
illustrated 1-3
Cisco Wireless Control System (WCS) 1-2
Cisco WiSM
configuring the Supervisor 720
4-89 to 4-91
described 1-9 to 1-11
guidelines 4-90
logical connectivity diagram and associated software
commands
E-2 to E-3
maximum number supported by router chassis 1-10
ports 3-3, 3-4
SSC key-hash 7-16
CKIP
configuring
using the CLI
6-26
using the GUI 6-25 to 6-26
described 6-25
Clear Filter link 6-7
clearing the controller configuration 9-28
Clear Stats button 12-19
CLI
basic commands
2-9
enabling wireless connections 2-9
logging into 2-7 to 2-8
logging out 2-9
navigating 2-9
troubleshooting commands D-5 to D-6
using 2-7 to 2-9
Client Certificate Required parameter 5-43
client location, using WCS 1-7
client MFP 5-66
Client Protection parameter 5-70
client reporting
configuring using the CLI
D-28 to D-31
configuring using the GUI D-25 to D-28
described D-19
Client Reporting page D-27
client roaming, configuring 4-40 to 4-44
clients
connecting to WLANs
13-15
viewing
using the CLI
7-78 to 7-79
using the GUI 7-74 to 7-78
viewing CCX version
using the CLI
6-42
using the GUI 6-40 to 6-41
Clients > AP > Traffic Stream Metrics page 4-59
Clients > AP page 4-59
Clients > Detail page
configuring client reporting
D-26
viewing a client’s CCX version 6-41
viewing client details 7-39, 7-77
viewing the status of workgroup bridges 7-38
viewing voice and video settings 4-58
Clients page
performing a link test
7-66
viewing clients 7-75
viewing the status of workgroup bridges 7-38
viewing voice and video settings 4-57
Client Type parameter 7-38, 7-39
Commands > Reset to Factory Defaults page 4-3
comma-separated values (CSV) file, uploading 13-20
Community Name parameter 4-26
conditional web redirect 6-49
configuring

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)