EasyManuals Logo

Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

Cisco 5510 - ASA SSL / IPsec VPN Edition
1822 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1004 background imageLoading...
Page #1004 background image
46-6
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 46 Configuring Cisco Unified Presence
Information About Cisco Unified Presence
These are sample access lists to open port 5269 on adaptive security appliance.
Allow traffic from any address to any address on port 5269:
access-list ALLOW-ALL extended permit tcp any any eq 5269
Allow traffic from any address to any single node on port 5269:
access-list ALLOW-ALL extended permit tcp any host <private cup IP address> eq 5269
If you do not configure the access list above, and you publish additional XMPP federation nodes in DNS,
you must configure access to each of these nodes, for example:
object network obj_host_<private cup ip address>
#host <private cup ip address>
object network obj_host_<private cup2 ip address>
#host <private cup2 ip address>
object network obj_host_<public cup ip address>
#host <public cup ip address>
....
Configure the following NAT commands:
nat (inside,outside) source static obj_host_<private cup1 IP> obj_host_<public cup IP>
service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_<private cup1 IP> obj_host_<public cup IP>
service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269
If you publish a single public IP address in DNS, and use arbitrary ports, configure the following:
(This example is for two additional XMPP federation nodes)
nat (inside,outside) source static obj_host_<private cup2 ip> obj_host_<public cup IP>
service
obj_udp_source_eq_5269 obj_udp_source_eq_25269
nat (inside,outside) source static obj_host_<private cup2 ip> obj_host_<public cup IP>
service
obj_tcp_source_eq_5269 obj_tcp_source_eq_25269
nat (inside,outside) source static obj_host_<private cup3 ip> obj_host_<public cup IP>
service
obj_udp_source_eq_5269 obj_udp_source_eq_35269
nat (inside,outside) source static obj_host_<private cup3 ip> obj_host_<public cup IP>
service
obj_tcp_source_eq_5269 obj_tcp_source_eq_35269
If you publish multiple public IP addresses in DNS all using port 5269, configure the following:
(This example is for two additional XMPP federation nodes)
nat (inside,outside) source static obj_host_<private cup2 ip> obj_host_<public cup2 IP>
service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_<private cup2 ip> obj_host_<public cup2 IP>
service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269
nat (inside,outside) source static obj_host_<private cup3 ip> obj_host_<public cup3 IP>
service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_<private cup3 ip> obj_host_<public cup IP>
service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

Table of Contents

Other manuals for Cisco 5510 - ASA SSL / IPsec VPN Edition

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 5510 - ASA SSL / IPsec VPN Edition and is the answer not in the manual?

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General IconGeneral
BrandCisco
Model5510 - ASA SSL / IPsec VPN Edition
CategoryFirewall
LanguageEnglish

Related product manuals