55-13
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 55 Configuring the Content Security and Control Application on the CSC SSM
Monitoring the CSC SSM
What to Do Next
See the “Software Updates” section on page 55-13.
Software Updates
To view information about CSC SSM software updates, choose Monitoring > Trend Micro Content
Security > Software Updates.
The Software Updates pane displays the following information, which is refreshed automatically about
every 12 seconds:
• The names of parts of the CSC SSM software that can be updated.
• The current version of the corresponding component.
• The date and time that the corresponding component was last updated. If the component has not been
updated since the CSC SSM software was installed, “None” appears in this column.
• The date and time that ASDM last received information about CSC SSM software updates.
What to Do Next
See the “CSC CPU” section on page 55-13.
Resource Graphs
The adaptive security appliance lets you monitor CSC SSM status, including CPU resources and memory
usage. This section includes the following topics:
• CSC CPU, page 55-13
• CSC Memory, page 55-14
CSC CPU
To view CPU usage by the CSC SSM in a graph, perform the following steps:
Step 1 Choose Monitoring > Trend Micro Content Security > Resource Graphs > CSC CPU.
The CSC CPU pane displays the components whose statistics you can view in a graph, including
statistics for CPU usage on the CSC SSM.
Step 2 To continue, go to Step 2 of the “Threats” section on page 55-11.
To Next Page
Loading...
Need help?
General
